I powered my system with one main battery. when i powered the system i hear the beeps from the esc but i have not throtle response.
olso i try to set the PCM FS point and try to set the Throttle Fail Safe but
there changed the value only from 2.09(i thing) to 0.89. i moved the throttle stick to other posision but nothing was changed.
All servos working well with move the sticks only the throttle not respond.
What is the differenses betwen the RVOSD PPM and PCM mode?
I have a futaba 149dp pcm reciver and working in pcm mode on my plane, which mode have to select on RVOSD?
-Set your throttle stick to 105% of normal range.
are you mean the end poind possition?
-On the receiver, set throttle channel failsafe to 110%.
are you mean on the transmitter? there i cannot set it to 110%
i have a futaba ff9 and it goes to 98% maximum.
Please for your help. if it is possible more simple for easy understanding.
What is AHI?