RVOSD gen 2 nothing work !

[jdm66]

Hello

I just received RVOSD gen 2!

I do a test to see if it works.

tx I connect a 12V and a KX191 12V on a 12V battery 3S lipo with the sensor 50A.

Two small LED lights up red and green, I have the 12V but no video and no OSD !

I have an optional sensor 130A, I do a test but the problem with voltage on TX and camera is 3V!

this sensor 130A dont work !

I waited a long time and pay the price for this OSD but nothing works!

[Alex Villa]

Did you complete this instructions?

The two red and green leds still lights up?

[reznikvova]

I test each OSD before I ship it. To make sure the RVOSD responds to IR remote and video in/out 12V rail is OK.


Check KX191 cable. Make sure it look like the picture I attached.

[reznikvova]

I test each OSD before I ship it. To make sure the RVOSD responds to IR remote and video in/out 12V rail is OK.


Check KX191 cable. Make sure it look like the picture I attached.

Also, if you can post a picture of your video transmitter/camera connection to OSD, it would help us find the problem.

[jdm66]

Hello

yes I followed the instructions.

With the sensor 50A, I have 12v on the video in and video out.

I try with another Tx, the problem is the same.

[jdm66]

Ok

give me an adress to send photos

regards

jdm

[reznikvova]

Upload the pictures here. Go to advanced reply> upload photos.
Or email to me, and I can post them.

[jdm66]

Vova

I tested the receiver's camera without going through RVOSD with my receiver and my glasses and the video splitter!

Good news video splitter works fine and my vidéo hardware !

attached link to download the video

http://dl.free.fr/vyGaQx3co

what is with the microchip pickit there is something to try before you return the equipment?

while waiting to hear from you

jd Metay

What you propose Vova?

nothing works with RVOSD!

[Alex Villa]

Vova

I tested the receiver's camera without going through RVOSD with my receiver and my glasses and the video splitter!

Good news video splitter works fine and my vidéo hardware !

attached link to download the video

http://dl.free.fr/vyGaQx3co

what is with the microchip pickit there is something to try before you return the equipment?

while waiting to hear from you

jd Metay

What you propose Vova?

nothing works with RVOSD!

Place a picture of the two sides of the 130A current sensor.

[jdm66]

ok

photo of 130A sensor recto verso