Sorry Randy, will post it tomorrow.
Super Moderator
Sorry Randy, will post it tomorrow.
Last edited by Alex Villa; 07-20-2011 at 07:17 AM.
Junior Member
Couldn't find the instruction on updating for RVOSD5. With the instruction on programming and options I have understood and how to replace the software couldn't understand.
PICkit2 usb it is necessary necessarily? Has connected to the computer through USB port RVOSD5. The device as USB-COM port was established.
Program PICkit programmer 2.61 doesn't find the device. Windows 7.
Last edited by al90100; 07-20-2011 at 12:41 PM.
Super Moderator
You do need the pickit2 in order to update it.
Super Moderator
5.04 have being uploaded
Junior Member
Alex, my gps doesn't work like it should, could you please give me some advice to solve the problem?
This is a short video of the GPS status:
http://www.youtube.com/watch?v=Qc9CSgRzG5U
Yesterday the GPS didn't work at all:
http://www.youtube.com/watch?v=eiyIHEYDgmE
Last edited by DatafoxChris; 07-21-2011 at 09:29 PM.
Super Moderator
You need to test it on a place with less obstructions. If still got low sat count, then need to separate the GPS from video transmitter and ESC. Also make sure the GPS antenna is pointed to the sky.
Senior Member
what do you have your HDOP set to? it should be 130 to 136 . is the GPS antenna hooked up right and facing up?Originally Posted by DatafoxChris
Senior Member
do I need to up date to 5.05 ? its 5.04 now but what does 5.05 do ?
Super Moderator
It improves inertial unit accuracy when flying upside down.
Junior Member
Hi alex I made an order on 07/20/201 the number is # 14618 it is still processing after 6 days???. Please advise when will order be shipped.
I bought one of these OSD few weeks back, really good product, but the current sensor is not working (only see main batt volts no current or mah reading other than what the osd uses itself), im buying another unit now. Could you put in with this order a spare current sensor if any free. Not worried if 2nd hand sensor. If current reading not working will send back other OSD with sensors for you guys to have a look. Running 6s about 70 amps changed jumper on osd so camera and tx don't get 24volts. Hey if you can add 2 plastic shrink wraps for i have to cut it to change jumper thanks
Regards Anthony
Posting Permissions
Reply With Quote